Hyper Safety Spotter Arms

Regular price $149.00

Save $-149.00
/

Only 0 left!

BURLI’s Hyper Safety Spotter Arms are manufactured from 2x3” 11-gauge American steel. They are compatible with all Hyper Rigs and Racks. These safety arms are 24” long and can easily be adjusted to your desired height.

This is the perfect accessory to compliment your BURLI Hyper Rig or Rack. Useful for protecting your garage gym floor and with heavy duty UHMA you don't have to worry about unnecessary wear and tear to your barbell.

 


Additional Specifications

  • Made in Portland, OR with high-quality American steel
  • Sold in pairs (left, right)
  • 11-gauge America steel
  • Heavy duty UHMW plastic liner
  • Depth from upright: 20"
  • 5/8" hardware
  • 5/8" bullnose pin
  • Black powder coat finish
  • Fits BURLI Hyper Rigs & Racks or 2x3" 11-gauge steel uprights | Note: BURLI does not guarantee flawless compatibility with rigs and racks produced by other manufacturers. 

Gear Specifications

  • Brand: Burli
  • Product Weight: 32LB
  • Length: 24”
  • Height: 14”
  • Material: 11-gauge American steel
  • Manufactured: Portland, OR
Hyper Safety Spotter Arms
Hyper Safety Spotter Arms
Hyper Safety Spotter Arms
Hyper Safety Spotter Arms
Hyper Safety Spotter Arms
Hyper Safety Spotter Arms
Hyper Safety Spotter Arms
Hyper Safety Spotter Arms
Hyper Safety Spotter Arms

Customer Reviews

Based on 12 reviews
92%
(11)
8%
(1)
0%
(0)
0%
(0)
0%
(0)
G
G.A.S.
Awesome Spotter Arms

Just what I needed for my Titan Fitness T-3 Series Short Squat Stand. I would have purchased a Burlifit squat stand, but they didn't have one that would fit in my basement that only has 72" ceilings. But their Spotter Arms fit perfectly and are solid. I can squat knowing these Arms have my back should I fail and need them. Definitely heavy duty enough. And they look great on my Stand as well. They are priced right, high quality, built right here in the US, and arrived within days of me placing my order - even during the busy holiday shipping season and all the backlog at the USPS. I could not be happier. Highly, highly recommend.

J
J.H.
Perfect fit!

Bought these for my rogue s-2 squat stand as rogue has been out of stock for months. Needless to say, they fit perfectly and I can’t recommend enough.

J
J.B.
Works like a charm

Fits my titan t3 rack with no issues

S
S.b.
Safety spotter arms

Quality is on point...very happy with goin with these...i use them on my rogue lite rack....

C
C.G.
Works Perfectly!

I have a Rogue S-1 squat rack that is fairly simple with no spotter arms. Rogue's "Infinity Safety Spotter Arms" have been sold out for a long while now and I was happily surprised to find Burli's "Hyper Safety Spotter Arms" that would fit the rack. They are around the same price point with Burli being slightly cheaper even prior to shipping (ISSA run $135 + ship). I have no issues with the quality or aesthetic of the spotter arms. They have very similar features to the ISSA and I expect to get lots of good use out of them. The HSSA have a bottom pin that has a more secure attachment in my opinion than the ISSA. There is a fairly sizable cotter pin that holds them in place, opposed to simple tensioned buttons that the ISSA use. That being said, if you don't want to take the time to insert/remove the pin, then maybe look at another option. One small thing I noticed with the HSSA I received is that one was bowed slightly so that it sits away from the rack instead of flush. However, there's not an issue during use, and the pin secures it anyways. The UHMW is placed similarly for both the ISSA and HSSA. Overall I'm impressed so far and can definitely recommend Burli!

M
M.B.
Fits Other Major Brand, Great Return Service / Problem Fixing

First: One of the pins on the spotter arms arrived damaged in shipping. Burli immediately emailed me a return label and shipped out a replacement ASAP. High marks for fixing the problem immediately with minimal hassle. I understand that things happen. The sign of a great company is how they deal with issues and treat their customers. I'm very satisfied with my interactions with customer support and the speed at which they corrected the issue (especially in light of pandemic problems and air choking fires which disrupted West coast businesses during that time-frame).

Second: The arms are well built and fit my 2x3 pillar squat rack (the "S-1" by a major manufacturer spelled similar to rouge). The other brand has been out of spotter arms for at least 8 months. Happy to find another USA manufacturer.

j
j.
Does the job!

Put these on my r0gue s2- never heard of Burli till I needed spotter arms. They do the job and mine go on easy. For the dude who got a bad one, I would talk to Eric.

They also come with pins to lock them into place. I dropped 225 from the squat video on to them, and they caught it. The rack didn’t move or shake. The shipping took a while cause they made them fresh, but it was worth the wait. Now I don’t have to go back to the gym and pay membership for sub par equipment.

S
S.G.
Definitely solid.

These things are built pretty damn solid. My only gripe is the quality control could be a little better. I waited over a month for these and when they arrived, one of them fit my rack perfectly and the other would barely go over the upright without beating it on. It turns out that the distance between the back of the spotter arm and the bracket that hooks around the upright is 3-1/8" on one of my spotter arms and barely 3" on the other. I know an 1/8" doesn't sound like much but when the upright is 3" wide and distance between the bracket and the arm is 3" wide it makes for a tight fit. Overall these things are pretty damn solid and serve their purpose so I would still recommend them.

E
E.B.
Fits Rogue ES2 perfect

As title says. Good quality, holds the weight well and is protected where the bar rests.

D
D.V.
Fantastic

I bought these to replace some spotter arms for my fringe sports 2x3 squat rack after my movers lost one of them and they fit perfectly with exceptional build quality at any price, but especially for this price (compared to R**** Infinity, etc). Added bonus was them being currently in stock and shipping quickly. My previous arms didn't line up flush with the vertical of the rack even after a replacement set was sent, but these Burli's are perfect. I'll be back for future needs!

Customer Reviews

Based on 12 reviews
92%
(11)
8%
(1)
0%
(0)
0%
(0)
0%
(0)
G
G.A.S.
Awesome Spotter Arms

Just what I needed for my Titan Fitness T-3 Series Short Squat Stand. I would have purchased a Burlifit squat stand, but they didn't have one that would fit in my basement that only has 72" ceilings. But their Spotter Arms fit perfectly and are solid. I can squat knowing these Arms have my back should I fail and need them. Definitely heavy duty enough. And they look great on my Stand as well. They are priced right, high quality, built right here in the US, and arrived within days of me placing my order - even during the busy holiday shipping season and all the backlog at the USPS. I could not be happier. Highly, highly recommend.

J
J.H.
Perfect fit!

Bought these for my rogue s-2 squat stand as rogue has been out of stock for months. Needless to say, they fit perfectly and I can’t recommend enough.

J
J.B.
Works like a charm

Fits my titan t3 rack with no issues

S
S.b.
Safety spotter arms

Quality is on point...very happy with goin with these...i use them on my rogue lite rack....

C
C.G.
Works Perfectly!

I have a Rogue S-1 squat rack that is fairly simple with no spotter arms. Rogue's "Infinity Safety Spotter Arms" have been sold out for a long while now and I was happily surprised to find Burli's "Hyper Safety Spotter Arms" that would fit the rack. They are around the same price point with Burli being slightly cheaper even prior to shipping (ISSA run $135 + ship). I have no issues with the quality or aesthetic of the spotter arms. They have very similar features to the ISSA and I expect to get lots of good use out of them. The HSSA have a bottom pin that has a more secure attachment in my opinion than the ISSA. There is a fairly sizable cotter pin that holds them in place, opposed to simple tensioned buttons that the ISSA use. That being said, if you don't want to take the time to insert/remove the pin, then maybe look at another option. One small thing I noticed with the HSSA I received is that one was bowed slightly so that it sits away from the rack instead of flush. However, there's not an issue during use, and the pin secures it anyways. The UHMW is placed similarly for both the ISSA and HSSA. Overall I'm impressed so far and can definitely recommend Burli!

M
M.B.
Fits Other Major Brand, Great Return Service / Problem Fixing

First: One of the pins on the spotter arms arrived damaged in shipping. Burli immediately emailed me a return label and shipped out a replacement ASAP. High marks for fixing the problem immediately with minimal hassle. I understand that things happen. The sign of a great company is how they deal with issues and treat their customers. I'm very satisfied with my interactions with customer support and the speed at which they corrected the issue (especially in light of pandemic problems and air choking fires which disrupted West coast businesses during that time-frame).

Second: The arms are well built and fit my 2x3 pillar squat rack (the "S-1" by a major manufacturer spelled similar to rouge). The other brand has been out of spotter arms for at least 8 months. Happy to find another USA manufacturer.

j
j.
Does the job!

Put these on my r0gue s2- never heard of Burli till I needed spotter arms. They do the job and mine go on easy. For the dude who got a bad one, I would talk to Eric.

They also come with pins to lock them into place. I dropped 225 from the squat video on to them, and they caught it. The rack didn’t move or shake. The shipping took a while cause they made them fresh, but it was worth the wait. Now I don’t have to go back to the gym and pay membership for sub par equipment.

S
S.G.
Definitely solid.

These things are built pretty damn solid. My only gripe is the quality control could be a little better. I waited over a month for these and when they arrived, one of them fit my rack perfectly and the other would barely go over the upright without beating it on. It turns out that the distance between the back of the spotter arm and the bracket that hooks around the upright is 3-1/8" on one of my spotter arms and barely 3" on the other. I know an 1/8" doesn't sound like much but when the upright is 3" wide and distance between the bracket and the arm is 3" wide it makes for a tight fit. Overall these things are pretty damn solid and serve their purpose so I would still recommend them.

E
E.B.
Fits Rogue ES2 perfect

As title says. Good quality, holds the weight well and is protected where the bar rests.

D
D.V.
Fantastic

I bought these to replace some spotter arms for my fringe sports 2x3 squat rack after my movers lost one of them and they fit perfectly with exceptional build quality at any price, but especially for this price (compared to R**** Infinity, etc). Added bonus was them being currently in stock and shipping quickly. My previous arms didn't line up flush with the vertical of the rack even after a replacement set was sent, but these Burli's are perfect. I'll be back for future needs!